DIRECT NUMERICAL SIMULATIONS ON THE TURBULENT FLOW PAST A CONFINED CIRCULAR CYLINDER WITH THE INFLUENCE OF THE STREAMWISE MAGNETIC FIELDS1)

绕流是托卡马克装置中液态包层内常见的流动形态,对流场与热量分布有着重要的影响.本文通过直接数值模拟(DNS),研究了不同磁场强度下$Re=3900$的圆柱绕流,分析了磁场强度对于湍流尾迹的影响.无磁场情况下,直接数值模拟的结果与前人的实验及模拟结果吻合很好.圆柱下游的尾迹中,随着流向距离的增大, 流向速度剖面逐渐从U型进化呈V型, 并慢慢趋于平缓,这表明尾迹中的流动结构受圆柱影响逐渐减小.圆柱后方两侧的剪切层中,由于Kelvin-Helmholtz不稳定性的影响,可以清晰地看到小尺度剪切层涡的脱落.通过对无磁场的计算结果施加流向磁场,本文计算了哈特曼数($Ha$)分别为20, 40和80的工况,以研究磁场效应对于湍流的影响.结果表明磁场较弱时,流动依然呈三维湍流状态.随着磁场增强, 近圆柱尾流区受磁场抑制明显,回流区被拉长,剪切层失稳位置向下游转移.圆柱后方的涡结构由于受到竖直方向洛伦兹力的挤压作用,随着哈特曼数的增加尾迹区域逐渐变窄.相比于无磁场情况的涡结构,由于磁场的耗散作用,相应的涡结构尺度变小.该研究不仅扩展了现有磁场下湍流运动的参数范围,对于液态包层的设计及安全运行同样具有重要的理论指导意义和工程应用价值.     

Rotating Variable-thickness Orthotropic Cylinder Containing a Solid Core of Uniform-thickness

This paper presents accurate elastic solutions for the rotating variable-thickness and/or uniform-thickness orthotropic circular cylinders. The present circular cylinder may contain a uniform-thickness solid core of rigid or homogeneously isotropic material. Different cases of rotating cylinders of various cores are investigated. These cylinders include completely isotropic solid cylinder, uniform-thickness orthotropic cylinder containing an isotropic core, variable-thickness orthotropic cylinder containing an isotropic core, uniform-thickness orthotropic cylinder containing a rigid core, and variable-thickness orthotropic cylinder containing a rigid core. For all cases studied, exact elastic solutions are obtained and numerical results are presented. The results include the radial, hoop, and axial stresses and radial displacement of the five cylinder configurations. The distributions of displacement and stresses through the radial direction of the rotating cylinder are obtained and comparisons between different cases are made at the same angular velocity.     

流向强迫振荡圆柱绕流的涡脱落模态分析

通过求解采用ALE方法描述的运动坐标系Navier-Stokes方程组，分析均匀来流下雷诺 数为150的静止和流向振荡的圆柱绕流. 主要研究了强迫振荡频率和较大振幅比 (A/D=0.3-1.2)对圆柱升力、阻力变化特性以及涡脱落模态的影响. 研究表 明，流向振荡圆柱绕流存在多种涡脱落模态，如对称S以及反对称A-I, A-III, A-IV等多种形式；比较研究结果，拓展了各模态下对应的锁定区域，并将其分为5个 子区；A-I模态中圆柱受力较以前所知更复杂；通过分析计算结果，发现最大加速度 比Af_{c}^{2}/Df_{s0}^{2}可能是涡脱落模态(尤其是对称S模态)最有效的控制参数.     

Thermal stresses in a viscoelastic three-phase composite cylinder

A thermoviscoelastic analysis of a three-phase composite cylinder is presented in this work. The solutions of the heat conduction and thermoelastic problem for three dissimilar media are derived based on the method of analytic continuation associated with the alternation technique. A rapidly convergent series solution for both the temperature and stress field, which is expressed in terms of an explicit general term of the corresponding homogeneous potential, is obtained in an elegant form. The hereditary integral in conjunction with the Kelvin–Maxwell model is applied to simulate the thermoviscoelastic properties while a thermorheologically simple material is considered. According to the correspondence principle, the Laplace transformed thermoviscoelastic solution is directly determined from the corresponding thermoelastic one. The real time solution can then be solved numerically by taking inverse Laplace transform. Finally, some typical examples of interfacial stresses are discussed.     

圆柱尾流的绝对不稳定性

在水槽和低湍流度水洞中进行亚临界雷诺数圆柱尾流稳定性实验来流速度由零缓慢增长到一定值后保持不变,稳定足够长时间后,在流向某站位处给流场一个有限幅值的脉冲扰动,测量扰动前后相当长时间内下游尾流速度信号的变化情况当雷诺数处于高亚临界值时,未受扰动的尾流速度脉动很小,处于定常状态,但对近尾流进行脉冲扰动后,能够激发出不衰减的旋涡脱落发现扰动位置限制在圆柱后一定范围内才能有效,再往下游则扰动随时间衰减．说明圆柱近尾流中存在一个绝对不稳定区,在该区域内的扰动将在当地放大,经过复杂的演化,最后形成不衰减的旋涡脱落.     

基于变形场测量数据主元压缩的模型参量反求方法

利用主元分析法对数字图像相关技术所测结构变形信息进行数据压缩,并进一步用于力学模型未知参量的反求计算。首先,为降低数字图像相关技术所测庞大数据的应用成本,提出利用主元分析法对结构表面变形场数据进行压缩,实现在保留结构表面变形信息主要特征的前提下显著降低数据量的目的;其次,针对压缩后的数据建立了基于最小二乘法的力学模型参量反求模型,并利用高斯牛顿法进行求解;最后,以具体算例从计算精度、收敛速度和抗噪性等方面验证了数据压缩对模型参量反求的效果。研究结果表明,所提方法在显著降低使用数据量的前提下,能够有效提高力学模型参量反求计算的收敛速度,特别是对于包含多个模型参数的反求问题,具有较高的精度和较好的稳定性。     

SIMULATION OF TYPHOON’S ANOMALOUS TRACK (Ⅰ)──RANKINE VORTEX MODEL

This paper proposes a method for simualting symmetric and simulating symmetric and asymmetric typhoonby using Rankine vortex model. Considering similarity between tropical cyclone andthe Rankine vortex,the paper has qualitatively discussed the feasibility of the methods In order to decide quantitatively Rankine vortex’s parameters to simulate typhoon’s structure, the paper has dealt with TCM data.for Yancy Typhoon (9012) as initial fields.. These results are considered as a foundation for further studying typhoon motion by CD approach.     

随机振动的一种加权等价线性化方法

加权等价线性化方法是研究非线性随机振动的一种有效近似方法。关健在于找到一个合适的权函数使之对多数非线性问题都有比较满意的结果。本文提出一种类似峰值概率密度函数的权函数,由此构成一种加权等价线性化方法,借几个各具特点的非线性振动系统进行了可行性验证,表明与一般的等价线性化方法相比,本法所得的均方响应精度有相当程度的改善。     

异质传感器数据的最优线性融合

研究了异质传感器对参数矢量进行的测量，测量数据基于线性均方估计的最优融合算法。提出和证明了异质传感器数据的最优线性融合定理，并得出“精度再差的传感器参与数据融合后都有利于提高系统的测量精度”这一结论。     

BEHAVIOR OF OBSTRUCTED SQUARE BUOYANT VERTICAL JETS IN STATIC AMBIENT （Ⅰ）—— VERIFICATION OF MATHEMATICAL MODEL AND NUMERICAL METHOD

Some experiments were made for the buoyant jet from a square orifice with a square disc placed on it in static ambient and concentration along the axis in self-similar area behind disc was measured. And at the same time a three-dimensional mathematical model was established to simulate the whole flowing under different conditions. All the results predicted by the numerical calculation were substantiated by the experiments. The results were compared with experiential formula for obstructed round buoyant vertical jets in static ambient and it was found that the two concentration distributions had good accordance. Star shape of temperature isolines on cross-sections in the near areas from the disc was found and it was a very special figure for obstructed square buoyant vertical jets with a square disc. The shape will transform to concentric circles gradually alike to the round buoyant vertical jet in self-similar area with increasing of the distance from the disc.